Brainstorm plot ideas on index cards. Write down each event in your script on their own note cards. This way you can easily reorganize the events to see what works best. Write down all of your ideas even if you think they're bad since you may not know what will work best in your final script.
If you don't want to use index cards you may also use a word document or screenwriting software such as WriterDuet or Final Draft.
Arrange the events in the order you want them in your script. Once you write all of your ideas on cards lay them out on a table or floor and organize them in the chronological order of your story. Look at how certain events lead into one another to see if it makes sense. If it doesn't set the index cards aside to see if they'd work somewhere better in your outline.
Have events in the future take place early in your film if you want to make a mind-bending movie with twists such as Inception.
Ask yourself the importance of each scene you want to include. As you go through your outline ask yourself questions such as “What is the main point of this scene?” or “How does this scene move the story forward?” Go through each of the scenes to see if they add to the story or if they're only there to fill out space. If the scene doesn't have a point or move the story you can probably remove it.
For example if the scene is your character just shopping for groceries it doesn't add anything to the story. However if your character bumps into someone at the grocery store and they hold a conversation related to the main idea of the movie then you can keep it.
Use high and low moments as your act breaks. Act breaks help separate your story into 3 parts: setup confrontation and resolution. The setup or Act I begins at the start of your story and ends when your character makes a choice that changes their lives forever. Throughout the confrontation or Act II your protagonist will work towards their goal and interact with your antagonist leading up to the climactic point of the story. The resolution or Act III takes place after the climax shows what happens afterward.
Writing Your First Draft
Set a deadline so you have a goal to reach. Choose a date that's about 8-12 weeks away from when you start since these are the usual industry times that writers have to work on a script. Mark the deadline on a calendar or as a reminder on your phone so it holds you accountable for working on your script.
Tell others about your goal and ask them to hold you accountable for finishing your work.
Plan to write at least 1-2 pages per day. During your first draft just write the ideas that come to your head and follow along with your outline. Don't worry about spelling or grammar entirely since you just need to get your story written down. If you aim to do 1-2 pages each day you'll finish your first draft within 60-90 days.
Choose a set time each day to sit down and write so you don't get distracted.
Turn off your phone or internet connection so you can just focus on writing.
Say your dialogue out loud to see if it sounds natural. As you write what your characters are saying talk through it out loud. Make sure it flows well and doesn't sound confusing. If you notice any problem areas highlight or underline the phrases and come back to them next time you edit.
Make sure each character sounds different and has a unique voice. Otherwise a reader will have a hard time distinguishing between who's speaking.
Keep writing until you're between 90-120 pages. Think of each page equalling 1 minute of screen time. To write a standard film script aim to write something about 90-120 pages long so it would run for 1 ½-2 hours long.
If you're writing a TV script aim for 30-40 pages for a half-hour sitcom and 60-70 pages for an hour-long drama.
Short films should be about 10 pages or less.
Formatting the Script
Create a title page for your script. Include the title of your script in all caps in the center of the page. Put a line break after the title of your script then type “written by.” Add another line break before typing your name. Leave contact information such as an email address and phone number in the bottom left margins.
If the script is based on any other stories or films include a few lines with the phrase “Based on the story by” followed by the names of the original authors.
Use size 12 Courier font throughout your whole script. Screenwriting standard is any variation of Courier so it's easy to read. Make sure to use 12-point font since it's what other scripts use and is considered industry standard.
Use any additional formatting such as bolding or underlining sparingly since it can distract your reader.
Put in scene headings whenever you go to a different location. Scene heading should be aligned to the left margin 1 1⁄2 in (3.8 cm) from the edge of the page. Type the scene headings in all caps so they're easily recognizable. Include INT. or EXT. to tell readers if the scene takes place inside or outside. Then name the specific location followed by the time of day it takes place.
For example a scene heading may read: INT. CLASSROOM - DAY.
Keep scene headings on a single line so they aren't too overwhelming.
If you want to specify a room in a specific location you can also type scene headings like: INT. JOHN'S HOUSE - KITCHEN - DAY.
Write action blocks to describe settings and character actions. Action blocks should be aligned with the left margin and are written in regular sentence structure. Use action lines to denote what a character does and to give brief descriptions about what's happening. Keep action lines brief so they don't overwhelm a reader looking at the page.
Avoid writing what the characters are thinking. A good rule of thumb to think about is if it can't be seen on a screen don't include it in your action block. So instead of saying “John thinks about pulling the lever but he's not sure if he should ” you may write something like “John's hand twitches near the lever. He grits his teeth and furrows his brow.”
When you introduce a character for the first time in an action block use all caps for their name. Every time after you mention the character name write it as normal.
Center character names and dialogue whenever a character speaks. When a character is about to speak make sure the margin is set to 3.7 in (9.4 cm) from the left side of the page. Put the characters name in all caps so a reader or actor can easily see when their lines occur. When you write the dialogue make sure it's 2 1⁄2 in (6.4 cm) from the left side of the page.
If you want to make it clear how your character is feeling include a parenthetical on the line right after the character name with an emotion. For example it may read (excited) or (tense). Make sure the parenthetical is 3.1 in (7.9 cm) from the left side of the page.
Revising Your Script
Take a 1-2 week break from your script when you finish it. Since you've been working on your script for a long period of time save the file and focus on something else for a few weeks. That way when you come back to edit it you'll be able to look at it with fresh eyes.
Start work on another script while you wait if you want to keep working on other ideas.
Reread your entire script and take notes on what doesn't make sense. Open your script and read it from start to end. Look for places where the story is the confusing or where characters are doing things without moving the story forward. Write your notes down by hand so you can remember them better.
Try to read your script out loud and don't be afraid to act out parts based on how you think they should be performed. That way you can catch dialogue or wording that doesn't work as well.
Share your script with someone you trust so they can look over it. Ask a friend or parent to look over your script to see what they think. Tell them what sort of feedback you're looking for so they know what to focus on. Ask them questions when they're finished about whether parts make sense or not.
Keep rewriting the script until you're happy with it. Work on story and character revisions first to fix larger problems in your script. As you work through each revision work from larger problems such as dialogue or confusing action sequences to minor problems such as grammar and spelling.
Start each draft in a new document so you can cut and paste parts you like from your old script into the new one.
Don't get too nit-picky with yourself or you'll never finish the script you're working on.
Creating a Story World
Think of a theme or conflict that you want to tell in your story. Use a “What if?” question to form the idea of your script. Start taking inspiration from the world around you and ask yourself how it would be affected by a specific event or character. You may also think about an overall theme such as love family or friendship for your story so that your whole script is tied together.
For example “What if you went back in time and met your parents when they were your age?” is the premise for Back to the Future while “What if a monster rescued a princess instead of a handsome prince?” is the premise to Shrek.
Carry a small notebook with you wherever you go so you can take down notes when you get ideas.
Pick a genre for your story. Genre is an important storytelling device that lets readers know what sort of story to expect. Look at the movies or TV shows that you enjoy most and try to write a script in a similar style.
Combine genres to make something unique. For example you may have a western movie that takes place in space or a romance movie with horror elements.
Choose a setting for your script to take place. Make sure the setting works with the story or theme of your script. Make a list of at least 3-4 different settings for your characters to travel between in your script so it stays interesting.
For example if one of your themes is isolation you may choose to set your script in an abandoned house.
The genre you pick will also help you choose your setting. For example it's unlikely that you'd set a western story in New York City.
Make an interesting protagonist. When you're making a protagonist give them a goal that they are trying to achieve throughout the script. Give your character a flaw such as being a constant liar or only thinking for themselves to make them more interesting. By the end of your script your character should go through an arc and change in some way. Brainstorm who your character is at the beginning of the story versus how the events would change them.
Don't forget to figure out a memorable name for your character!
Create an antagonist that opposes your protagonist. The antagonist is the driving force that goes against your protagonist. Give your protagonist and antagonist similar qualities but change the way the antagonist approaches them. For example your protagonist may be trying to save the world but the antagonist may think the only way to save it is to destroy it.
If you're writing a horror story your antagonist may be a monster or a masked killer.
In a romantic comedy the antagonist is the person your main character is trying to woo.
Write a 1-2 sentence logline to summarize the plot of your script. A logline is a short summary of the main events in your film. Use descriptive language to help your logline sound unique so other people understand what the main ideas of your story are. Make sure the conflict is present in your logline.
For example if you wanted to write a logline for the movie A Quiet Place you may say “A family is attacked by monsters ” but it doesn't give any details. Instead if you wrote “A family must live in silence to avoid being captured by monsters with ultra-sensitive hearing ” then the person reading your logline understands the main points of your script.
Writing a script is a great way to stretch your creativity by making a short film movie or TV show. Each script starts with a good premise and plot that takes your characters on a life-changing adventure. With a lot of hard work and correct formatting you can write your own script in just a few months!